Manufacturer of Brass and Copper Alloy Components
Close
Air Terminal conductors base is manufactured from gunmetal or bronze and can be used for supporting & connecting rod to the circular conductors of flat surfaces.
Material: Brass, Gun Metal or bronze
Application: This connection allows the joint between copper or aluminum tapes to metallic structures.
C-Crimp Connector are manufactured of extruded electrolyte copper with thickwalls,used for parallel and tap connections of copper cable. Appropriate tools should be use for installation of C-Crimp connectors.
These Circular Conductor Clips are manufactured from copper base alloy.This clip has a hole at the base for fixing the building or structure with appropriate fasteners and wall plug.
Copperbonded earth rod installers the best economical methodsto achieve lower earth resistances. Each rods are having a higher tensile strength and lower carbon steel core. With 99.95% pure copper, it is directly applied electrolytical and form a metallurgic bond with steel core and copper.
Materials: Brass, Gun Metal or bronze.
Application: Counter bore is for covering the rod threads from the damage of corrosions.
CD Tape Clip can bemanufactured from gunmetal, bronze or brass. The clip with a hole at a base for fixing with building or structures with appropriate fasteners and well plugs.
These Plate IS used in concrete structure for convenient ground system connection points.They are used where reinforcing the bars are electrically continuous and to be used for down conductor. These earthing points allows easy access of the lightening protections& earthing systems.Grounding plate connection are result in current carrying capacity will be equal to that of the conductors or studs and cannot loosen or corrode.
Materials: Brass, Gun Metal or bronze.
These clamps are used for straight connection of tapes. Being joints, it can also use as testing points for the network by disconnecting the joints.
Rod to “O” cable clamp are used to fix rod to cable conductor. These clamps are durable and resistant to corrosion. Clamps are made of brass or gun metal.
Parallel groove connector is used for connecting or branching overhead conductors. Extruded create a high strength clamp. Slotted holes allow adjusting for varying conductors on each side. Its type test is accordance with IEC61238-1. Shape Body made from extruded copper or brass and bolt and spring washer are made of steel with hot dip galvanized plating.
Plate type test clamp are used as T Joint or straight through joints of tapes. It is also used for testing points for the network by disconnecting the joints. These also used for heavy duty tape up to 50×6 tape.
Re-bar clamp are used for bonding to handrails, re-inforcingbars, pipes, etc.
Ridge saddle are made of gun metal or brass. Used for vertical support to lightening conductor air terminal on the roof edges. These are used for fixing air rod and connecting to tape.
Rod brackets are made of copper alloy. Rod bracket being used for providing projection from building or face. Rod bracket is mainly used with rod to tape coupling where it is not possible to fit saddle on the roof and the air rod has to be fitted on the side of the building.
Rod to Tape Coupling are made of copper alloy. Used with the air rod brackets to connect their rod and tapes. The coupling is screwed onto the air rod and then connects to the tape with the bolts.
Air Terminals tape base,can be manufactured from gunmetal, brass or bronze. It is Used for vertical support to lightening conductor, mounting air terminal on the roof or flat surface. It is used for fixing of air rod and connecting tape.
These are made from gunmetal or brass. These clamp are used for crossing over tapes and cable. To make straight through joint or T connection in a continues network. The lids are secured by four screw.
Square tape clamp are made from brass or gunmetal. These are used for forming straight through cross and tee joint in network of tapes. The lids are secured by four screw.
Made from brass and used for bonding copper and aluminum conductor to steel work.
Test clamp are suitable for end to end joint.
These clamps are used to connect flat taps in a horizontal position on the rod.
Line tap are made from extruded brass and give high strength. It is available in brass natural and electroplated nickel plated from.
