Grounding and Bonding

Grounding and Bonding Products

Hot Line Clamps

Widely use for overline electrical distribution service and connections are made with the help of hot sticks.

Body is manufactured from aluminum bronze C95500 or C95600 for Conductor Compatibility, High Strength, and Corrosion resistance.

Eyebolt is Manufactured from stainless steel. Eyelet and keeper are Manufactured from aluminum bronze.

Wide jaws give a more prominent region of surface contact diminishing the contorting of the conductor during establishment.

We manufacture hot line clamp for Run Diameter .128”-.414”, .162”-.745”, .250”, 860”, .502”, -1.031”

We manufacture Hotline clamp as per the customer’s specifications.

U-Bolt Grounding Clamp

U Bolt Style Copper Ground Clamps 1 Conductor – This U Bolt Style Copper Ground Clamps 1 Conductor accommodates One Ground Electrode for bonding to Water Pipe or Fencing.

U Bolt Style Copper Ground Clamps 1 Conductor features include:

U Bolt Style Grounding and Bonding.

Connect with Single Ground Wire Parallel or at Right Angle to Pipe, Copper Tubing, Ground Rod or Fencing.

Used with Continuously Grounding Loop.

The casting of High Strength High Conductivity Copper/Bronze.

Stainless Steel Bolts, Nut and Lock Washer.

We can also manufacture as per customer’s specification & design.

Copper Grounding and Bonding-Pipe Clamps

Grounding and Bonding for Armor or Unarmored Wires – Armored Wire Grounding and Bonding are Excellent for Grounding Application.

Grounding and Bonding for Armored or Unarmored Wires features include:

Used to ground armored or unarmored wire to water pipe, Copper tubing and ground rod.

Armored Cable Adaptor Pre-Installed on Clamp.

The cast of High Strength High Conductivity Copper alloy.

Supplied with Steel Screws, Zinc Plated for corrosion resistance.

Standard Collar and Pressure Bar grips Cable Insulation to resist Pull-Out Force on Conductor.

Ground clamp provides maximum conductivity & strength.

We can also manufacture as per customer’s specification & design.

Bronze Vise Connector

Vice Grip Grounding Clamp – Vice Grip Grounding Clamp For Flat Bar Grounding Application.

Vice Grip Grounding Clamp For Flat Bar Grounding Application features include:

Connecting Ground Conductors to Flat Bar with One or Two Conductors.

Lay-In(Side Entry) Feature for Easy Installations.

Use as Splice or Feed/Taps.

The casting of Highly Strength of Higher Conductivity Bronze and Excellent Heat Dissipations.

V Groove Aligns Conductor.

Interlocking Design for Resistance to Vibrations.

We can also manufacture as per customer’s specification & design.

Ground Clamp Lay-In Rebar

Lay-In Rebar Grounding Clamp – Lay-In Rebar Grounding Clamp For Rebar Grounding Application.

Lay-In Rebar Grounding Clamp For Rebar Grounding Application feature includes:

Connecting Ground Electrode Conductors to Bare Rebars.

Rugged & Compact.

Lay-In Features for Use on Continuous Grounding Loops.

Stainless Steel nut and bolt.

The casting of Highly Strength Conductivity Copper alloy.

For use of Copper Conductors only.

Not for use on Epoxy Coated Rebars.

We can also manufacture as per customer’s specification & design.

Ground Jumper Clamps

Grounding Jumper Clamp for Splicing of Galvanized Steel and Aluminum or Copper wire – Our Grounding Jumper Clamp is perfectly suitable to Service Entrance Application.

Grounding Jumper Clamp for Aluminum and Galvanized Steel or Copper Service Entrance Cables features include:

Grounding Jumper Clamp is for Splicing and Tapping Electrical Service Entrance Cable.

Suitable for connecting with Galvanized Steel, Aluminum and Copper or Copper Bonded Steel Wires.

Bow Design Spring Action Maintains Positive Clamping Force.

The Casting of high strength and High Conductivity of Copper Alloy.

We can also manufacture as per customer’s specification & design.

I Beam Ground Clamp

I Beam Grounding and Bonding are Isolated From Beam – This I Beam Ground Clamp keeps Grounding Electrodes Isolate From I Beam when Grounding to I Beam.

I Beam Grounding and Bonding Isolate From Beam feature includes:

Connecting Grounding Conductors to I-Beam or other Metal Framings.

Connecting 1 Grounding Wire to 1/4″ Thick Bar and Stanchion.

Popular for Fence Posts, Cable Tray and Structural Steels.

Lay-In Features for use with Continuous Grounding Loop.

The casting of High Strength and Highly Conductivity Copper Alloys.

With Nuts, Stainless Steel Bolts and Lock Washer.

We can also manufacture as per customer’s specification & design.

Aluminum Lay-In Connector For Copper And Aluminum Conductors

Aluminum Lay-In Connector For Copper/Aluminum Conductor feature includes:

An Open face design allows the installers for quick lay-in the grounding conductors as a jumper to multiple conduits with no break in the grounding conductors.

Aluminum lay-in conductor is designed for use in Conduit Grounding Bushing and other Grounding Application.

Excellent connector for tapping off the main conductors without cutting due to lay in feature.

Manufactured from high strength 6061-T6 Aluminum alloy to ensure maximum strength & conductivity.

These conductors are Tin Plated to provide low contact resistance and protection from corrosion.

We can also manufacture as per customer’s specification & design.

Copper Lay-In Connectors

Lay-In Connector For Copper Conductor – Lay-In Copper Conductor is best for the Grounding of Swimming Pools.

Lay-In Connector For Copper Conductors feature includes:

The Lay-in Copper Lug is ideal for using on Grounding the Swimming Pools, For Jump to the Multiple Conduits and Conduit Bushings.

Lay-in connectors are used on Conduit Grounding Bushings and for other Grounding Application.

Open-faced Design allows the installer to quickly Lay-In the Grounding Conductor as a Jumper to Multiple Conduits with No Break in the Ground Conductor.

With Stainless Steel Screw.

For use with Copper Conductors Only.

The casting of High Strength of Copper alloys that containing 80% or more Copper.

We can also manufacture as per customer’s specification & design.

Copper Bronze Ground Clamp Lay-In Direct Burial

Parallel Lay-In Pipe clamp or Rebar Ground Clamps – Our Copper Alloy Parallel Lay-In Copper Grounding and Bonding are suitable for Direct Burial in Earth and Concrete.

Ground Lay-In Rebar Clamps feature includes:

Used to Connecting Grounding Conductor Parallel to Water Pipe, Grounding Rod, Copper-Water Tubings or Rebars.

Lay-In Grounding Conductors are Parallel to Pipe or Rebar for easy wire installations.

The casting of High Strength Copper Alloys containing 80% or more Copper percentage.

It Provides Maximum Conductivity and Strength.

Supplied with Copper or Stainless Steel Screws.

Suitable for Direct Burial in Earth & Concrete.

We can also manufacture as per customer’s specification & design.

Intersystem Bonding Connector

Intersystems Bonding Connectors with Lay-In Features- These Intersystems Bonding Connectors accommodate all low voltage of servicing ground for bondings to the main grounding electrodes.

Intersystems Bonding Connectors feature includes:

Fast & easy Installations on Grounding Conductors Below Meters.

Lay-in Feature allowing Terminations to exist the Main Grounding Electrodes without Cutting or Splicing Conductors.

Open-faced designs allowing the installers to quickly lay-in the groundings conductors as a jumper to multiple service grounds with no breaking in the ground conductors.

4 Bonding Positions are accommodating low volt utility service ground wire.

Made of 6061-T6 Aluminum, Bronze.

With Stainless Steel Slot Head Screws.

We can also manufacture as per customer’s specification & design.